Item shown may not be actual product.
Product and price information are subject to change without notice.

Discontinued
Superseded to ATECH2FR100B

3/8" Drive Electronic Angle Torque Wrench

Item Number: ATECH2FR100A Supplier: SNAP-ON TOOLS

Description

Snap-on® TECHANGLE™ electronic torque and angle wrenches are designed to provide basic electronic features, including Units Conversion, Track, Peak Hold, and Preset functions on a robust, yet ergonomically comfortable, wrench platform. The Angle mode utilizes piezoelectric gyroscope technology that requires no mechanical reference.

TECHANGLE™ eliminates the need for angle gauges and protractors and provides the fastest and most accurate way to achieve torque plus angle tightening sequences. The digital readout shows torque setting, and then changes to the follow-up angle desired. Angle calculation is based on the same gyroscope technology that keeps helicopters flying level.

Features

Torque Accuracy: 2% clockwise (CW), 3% counter-clockwise (CCW) from 20-100% full scale (FS); 4% CW, 6% CCW from 10-19% FS; 8% CW, 10% CCW from 5-9% FS
Angle Accuracy: ± 1% of reading ± 1°@ angular velocity >10°/sec <180°/sec
Display Resolution 1°
Manual Preset and automatic Track and Peak Hold modes
Torque Units Conversion, N.m, ft.-lb., in.-lb.
Audible (tone) and Tactile (vibrating handle) Preset Alerts
Display Resolution 0.1 ft.-lb., 0.1 N.m, 1 in.-lb.
Each button has only one function (power on, preset increase, preset decrease, unit of measure select)
Comfortable, non-slip grip handle
Stand on handle bottom keeps tool from rolling off flat surface
Sealed Flex head ratchets move ± 15°
Three AA alkaline cells for battery power allow for up to 40 hours continuous operation
Low battery indicator
Auto shut-off after 2 minutes idle
Designed to withstand shocks without failure
Splash proof, protects against water and most automotive shop fluid
ISO-6789-2003 and ASME B107-28-2005 Standards compliant
Certificate of NIST traceability for 20% to 100% of full scale

Includes

TECHANGLE™ wrench
EU/CE-DE, ES, FR, IT, NL, PT, UK and Japanese Language manual
Certification of accuracy
Storage case

Warranty

One (1) year.

NOTE: TECHANGLE™ wrenches are calibrated at the factory using angular displacement and torque measurement instruments that are traceable to the National Institute of Standards and Technology (NIST). Torque parameters comply with ISO 6789-2003 and ASME B107-28-2005. No U.S. or International Standards exist for angle wrenches.

Product Specifications

Angle Range: 5-360°
Gear action: 10°
Gear teeth: 36
Head depth: 5/8"
Head type: Sealed flex head
Head width: 1-5/32"
Housing color: Grey
Humidity: up to 90% non-condensing
Length: 17"
Operating temperature: 40-110°F (5-42°C)
Range, ft.-lb.: 5-100
Range, in.-lb.: 60-1,200
Range, N•m: 13.5-135.0
Square drive: 3/8"
Storage temperature: 0-122°F (-20-50°C)
Weight: 2.2 lbs.

Over-torquing can cause breakage. Force against flex stops on flex head can cause head breakage. An out-of-calibration angle wrench can cause part or tool breakage.
To avoid damaging the wrench, never use the wrench with the power off. Always turn ON the wrench so the applied torque is being measured.
Do not press ON/RESET while torque is applied or while the wrench is in motion.
Never use this wrench to break fasteners loose.
Do not use extensions, such as a pipe, on the handle of the wrench.
Before each use, check that the wrench capacity matches or exceeds each application.
Verify calibration if the wrench is dropped

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.