Item shown may not be actual product.
Product and price information are subject to change without notice.

Discontinued

Fluke 88V Automotive Multimeter

Item Number: FLU88V Supplier: FLUKE ELECTRONICS CORPORATION

Description

Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles.

The 88V is made in the USA with U.S. and foreign components and carries the industry leading lifetime warranty. The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection.

The 88V is independently tested to comply with the 2nd edition of ANSI / ISA S82.01 and EN61010-1 CAT IV 600 V/CAT II 1000 V. They can withstand impulses in excess of 8000 V and reduce risks related to surges and spikes.

Features

Large digital display with bright, two-level back light makes the Fluke 88V significantly easier to read than the old Fluke 88
6000 counts, 3-3/4 digits
Measure up to 1000 V AC and DC
Measure up to 10 A, 20 A for up to 30 seconds
Built in thermometer lets you carry on less tool
Frequency to 200 kHz and % duty cycle
RPM measurements with inductive pick-up
Millisecond pulse width measurements for fuel injectors
10,000 µF capacitance range for components and motor caps
Min/Max-average recording with Min/Max Alert to capture variations automatically
Peak capture to record transients as fast as 250 µs
Relative mode to remove test lead interface from low ohms measurements
Auto and manual ranging for maximum flexibility
Touch Hold to capture stable readings avoiding noisy signals
Analog bar graph for fast changing or unstable signals
Input alert provides audible warning against wrong use of input jacks
Improved selectable sleep mode for long battery life
Access door for fast battery changes without opening the case
"Classic" design with new removable holster with built-in test lead and probe storage
10 MΩ input impedance won't load circuits

Warranty

Limited lifetime warranty

Product Specifications

80 BK Temperature Probe: -40°C - 260°C (-40°F - 500°F), 2.2°C or 2% whichever is greater
AC Bandwidth: 5 kHz
AC Current Maximum Amps: 10 A
ACV Accuracy: ±(0.5% + 2)
ACV Best Resolution: 0.01 mV
ACV Maximum Voltage: 1000 V
Battery: 9 V
Capacitance Accuracy: ±(1% + 2)
Capacitance Best Resolution: 0.01 nF
Conductance Accuracy: ±(1.0% + 10)
Conductance Maximum Resolution: 0.01 nS
DC Current Amps Accuracy: ±(0.4% + 2)
DC Current Best Resolution: 0.001 mA
DC Current Maximum Amps: 10 A
DCV Accuracy: ±(0.1% + 1)
DCV Best Resolution: 0.01 mV
DCV Maximum Voltage: 1000 V
Dimensions: 5.2 cm x 9.8 cm x 20.1 cm
Duty Cycle Accuracy: within 2% per KHz + 0.1%
Duty Cycle Best Resolution: 01%
Frequency Accuracy: ±(0.005% + 1)
Frequency Best Resolution: 0.01 Hz
Maximum Capacitance: 9,999 µF
Maximum Conductance: 60.00 nS
Maximum Duty Cycle: 99.9%
Maximum Frequency: 200 KHz
Maximum Resistance: 50 MΩ
Operating Temperature: -20°C - 55°C (-4°F - 131°F)
Resistance Accuracy: ±(1% + 2)
Resistance Best Resolution: 0.1Ω
Storage Temperature: -40°C - 60°C (-40°C - 140°)
Temperature Measurement: -200.0°C - 1090°C (-328.0°F - 1994.0°F), 1% excluding probe
Weight: 624 g (22 oz)

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.