search
Acura Dealers: Please enter the site from the iN or eMall system for dealer specific content and pricing
product
product Item shown may not be actual product.
Product and price information are subject to change without notice.
$4,307.00 *
*log in for dealer pricing


ATF Cooler Cleaner


Item Number: GTHTTCF7AR    Supplier: NORCO INDUSTRIES INC
Description

The ATF Cooler Cleaner, manufactured by G-TEC, Inc., is a portable, electrically-operated special tool that cleans the ATF cooler with high-pressure, heated ATF. This cleaning action melts down waxy varnish residue left by burnt ATF and purges metal particles, clutch material, and other contaminants.  Applicable for all vehicles with an in-radiator ATF cooler.

According to Service Bulletin (Honda 89-022, Acura 89-015) before installing an overhauled or remanufactured A/T, the ATF cooler must be thoroughly clean to prevent system contamination. Failure to do so could cause a repeat A/T failure

Features

  • Uses quick-connect fittings and color-coded hoses for easy hookup.
  • Requires no special fluids: Uses about 9.5 gallons of Honda ATF-Z1, which gets filtered and recirculated.
  • Heats ATF to a temperature of 140° to 150°F and then pumps it through the ATF cooler at high pressure (100 psi) using a pulsating action and air purging. Switching the hoses cleans the ATF cooler in the reverse direction.
  • Uses two magnetic non bypass spin-on filters to trap purged contaminants.
  • Includes a convenient built-in tool tray.

Includes 

  • GTHTTCFHA        Honda adaptor set  
  • GTHTTCFFMK     Flowmeter
  • GTHHCFMRV      Manual reverse valve
  • GTHTTCFHM       Vibration hourmeter
  • (2) Spin-on, non-bypass oil filter

Accessories

  • GTHNBP2           Spin-on, non-bypass oil filter (6-pack)
  • GTHNBP12         Spin-on, non-bypass oil filter (12-pack)

Warranty

One year

Follow these instructions to keep the ATF cooler cleaner working properly:
  • Replace the two magnetic non bypass spin-on filters once a year or when you notice a restriction in the ATF flow.
  • Fill the tank so the ATF is 4.5 inches from the top of the filler hole; do not overfill.

NOTE: If the fluid level is low, the red indicator above the HEAT toggle switch comes on and the tank heater does not work.

  • Replace the ATF in the tank when it looks dark or dirty