Item shown may not be actual product.
Product and price information are subject to change without notice.

*log in for dealer pricing

RX-10TL Flush-Mount Lift Rack, PowerSlide Slipplates

Item Number: HUNRX10LFTPS Supplier: HUNTER ENGINEERING COMPANY

Description

RX Flush-Mount Scissor Rack (10,000 lb. Capacity/Long Deck)
with Air Line Kit, (2) 6,000 lb. Capacity Swing Air Jacks and PowerSlide Slipplates and Turnplates

The Hunter RX-10T Lift features a 10,000 lb. lifting capacity and a scissor design that requires minimum bay space. The flush-mount installation sets the runways flush to the floor when fully lowered, eliminating the need for long approach ramps.

There are many RX-10T models available in surface-mount or flush-mount with various optional add-ons. For assistance in picking the right model for your service facility, call your program representative.

Features

PowerSlide locks and unlocks slipplates and turnplates with the touch of a button, removing the hassle of pulling and replacing lock-pins.
Fully Integrated Alignment capability allows communication with a compatible aligner to control PowerSlide functions automatically.
Extra-wide 24" runways with louvered ramps prevent wheel spin in wet conditions and make positioning the vehicle on the lift rack easier.
Open access at the front and rear create an unrestricted workspace underneath the vehicle.
Safety locks at 16 height positions offer a variety of working heights for the technician.
Complete operation from the console.
Velocity safety fuses with instantaneously shutdown in the event of hydraulic failure.
Sensor Feedback System aid in keeping the runway level and safely stops if an obstruction is detected.
Chromed pins and Teflon bearings for long life.
6,000 lb. capacity swing air jacks add the capability of lifting vehicles off the runways during alignment procedures and other service operations.
An integrated air line kit provides connections at the front and rear for tools and jacks.
Optional AlignLights runway lighting kit illuminates the workspace under the vehicle and turns on and off automatically as rack is raised or lowered.

Includes

HUN512422PPP (2) Front wheel stops
HUN224422 (2) Wheel chocks
HUN2016181 (1) Air line kit
HUN1471431PP (2) Louvered ramps with built-in wheel stops
(2) 6,000-lb. capacity swing air jacks
(2) PowerSlide slipplates
(2) PowerSlide turnplates

Options

HUN2021731 AlignLights Lighting Kit

Warranty

Call the Hunter Customer Service Department at 1-800-448-6848 for specific warranty information.

Product Specifications

Air: 90-150 p.s.i.
Alignment Height: All lock positions
Lifting Capacity: 10,000 lbs.
Lowered Height: 8.75" (222 mm)
Maximum Lift Height: 72" (1829 mm)
Maximum Wheelbase - General Service: 192" (4877 mm)
Maximum Wheelbase - Two-Wheel Alignment: 179" (4547 mm)
Minimum Four-Wheel Alignment: 88" (2235 mm)
Motor: 208-230 VAC/60 Hz/26 Amps/1 PH
Runway Width: 24" (609 mm)
Tread Width - Maximum Outside: 88" (2235 mm)
Tread Width - Minimum Inside: 40" (1016 mm)

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.