Item shown may not be actual product.
Product and price information are subject to change without notice.

Discontinued

Cool-Tech A/C Station for R-134a, (115 Volt/60 Hz)

Item Number: ROB342000 Supplier: BOSCH AUTOMOTIVE SERVICE SOLUTIONS

THIS ITEM HAS BEEN DISCONTINUED. SUGGESTED REPLACEMENT IS ROB34788 and ROB16910 COMBINED.

Description

Cool Tech for R-134a

Includes

ROB34724 Spin-on recycling filter-drier
ROB16913 Refrigerant identification filter
ROB34215 Thermal paper for printer
ROB17756 Oil drain bottle
ROB18190A Service coupler (blue)
ROB18191A Service coupler (red)

Features

Exceptional Accuracy:
- Electronic scale is mounted internally and includes built-in dampening of shock loads that occur when the unit is moved over gravel or an uneven floor.
- Microprocessor — controls functions; typical evacuation time and recharge amount are preprogrammed as defaults but can be easily changed as needed. Also signal when it's time to drain the oil container, change the filter, pump oil or source tank.
Unmatched Speed:
- Oilless vacuum pump — quickly pulls deep vacuum conditions for thorough evacuation.
- Heavy-duty compressor — pulls from both the high and low sides for fastest recovery; initial pass through the filter-drier provides single-pass recycling.
- Oil injection — lets you replace system oil in seconds through the service hoses while the system is in a vacuum, with no other connections needed — just press a button.
Reliability:
- Constant refrigerant refill — maintains 12-15 lbs. (5.44 - 6.8 kg) of refrigerant in the internal storage vessel so you'll never have to stop in the middle of a job to refill the tank. Uses a 30 or 50 lb disposable source tank.
- Automatic operation — guarantees service consistency from job to job, technician to technician. Takes just the push of a button to start recovery, evacuation and recycling.
- Internal manifolds — block assemblies control refrigerant flow, reducing the possibility of leaks and simplifying field service.
All controls are at your fingertips:
- Built-in refrigerant identifier — critical of today's A/C service! Automatically tests refrigerant in the vehicle at the beginning of each job. If contaminated refrigerant is detected, recovery is stopped to protect the unit and the shop's refrigerant supply.
- Built-in printer — increases customer confidence, simplifies diagnosis and provides a record of service. Just press "Print" key to get a hard copy of pressures/temperatures, ambient conditions and other data.
- Plain language prompts — clearly tells the technician what needs to be done, right down to opening service couplers, or what function the unit is currently performing. Select English, French or Spanish. Also select pounds or kilograms.
Integrated flushing capabilities.

Warranty

One year

Product Specifications

Dimensions: 52" h x 33" w x 20" d (132 cm x 83.8 cm x 50.8 cm)
Displacement recycling filter drier: 43 cu. in (710 cc) spin-on
Operating range: 50 -120° F (11 - 49° C)
Pump free air: 6 c.f.m. (142 liters/minute)
Recovery rate: Approximately 1/2 lb. per minute
Scale resolution: 1/100 lb. (.02 kg)
Source tank: 30 or 50 lbs. (23 kg) refillable (not included)
Voltage: 115 volts/60 Hz
Weight: 91.63 kg (202 lbs.) without source tank

Honda R-134a and R-12 refrigerants are available in industry standard 30 lb. nonreturnable, nonrefillable cylinders through your normal parts ordering procedures.
The use of a Thermistor Vacuum Gauge during evacuation will enable you to monitor the moisture content in the system, ensuring it is dry enough for charging. 700 microns or less is desirable.
To maintain optimum performance of this equipment always replace the filter (ROB34724) and vacuum pump oil at appropriate intervals.
The risk of contamination is much higher now due to the increasing numbers of alternative refrigerants available. Protect your refrigerant supply from contamination. Using a refrigerant identifier is an excellent means to check the vehicle system before recovery and to check tanks that you have or consider purchasing.

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.